A polymer modified asphalt emulsion based driveway resurfacer designed to beautify, protect and renew asphalt pavement surfaces. Fortified with sand for added strength, filling, slip resistance and durability.
Uses • All types of asphalt pavements
• DO NOT USE on concrete or masonry surfaces
Application JETCOAT Select Driveway Resurfacer is packaged ready to use. No stirring is necessary. With pavement still damp, apply a uniform coat of sealer, being sure to avoid heavy or uneven application which may result in cracking or tracking. A second coat should be applied after the first coat has dried “to the touch” or within 24 hours at stated coverage rate. A rubber squeegee or brush is recommended for application. Depending on pavement porosity, coverage will vary from 250-350 sq. ft. per pail.
(For Vehicle traffic, you must allow 24 hours for product to completely cure.)
CALIFORNIA PROPOSITION 65 CHEMICAL WARNING: This product contains chemicals known to the state of California to cause cancer.
A rubber squeegee or brush is recommended for application.