jetcoat jetcoat Where To Buy Contact
Home About Us Products Brands Literature Sds & Data Sheets spacer
JETCOAT...the trusted name
Jetcoat Home Page Jetcoat Home Page Jetcoat Home Page
  Go Back To Products Page  

 

 

JETCOAT Non-Fibered Emulsion Roof and Foundation Coating
Non-Fibered Asphalt Emulsion Coating

  • Easy To Apply
  • Soap & Water Cleanup
  • Seals Out Water & Moisture
  • Environmentally Friendly Water-Based Formula
  • Zero Voc Formula

Sizes Available:
4.75 Gallon pail
.9 gallon Pail

Coverage: (Approx.)
Metal Surfaces 75-100 sq. ft. per gallon
Concrete and Masonry Surfaces 50-75 sq. ft. per gallon
Composition Roofing 50-75 sq. ft. per gallon

» sds (pdf) » Where to Buy
» Tech Data Sheet PDF Icon (pdf)  

Description
A non-fibered asphalt emulsion designed for coating a variety of roof surfaces, concrete foundations and wood fences. Non-fibered formulation facilitates ease of sprayability. Environmentally friendly water-based formula. Dries black.

Uses
• Metal Roofs
• Concrete Roofs
• Composition Surfaces
• Concrete Foundations

Application
When coating roofs, nail down any loose laps or parts. Repair splits, cracks, weak or leaking areas with JETCOAT All-Weather Roof Patch and ResinTreated Multi-Purpose Reinforcing Fabric, adhering to the directions on the container. Brush or broom away all dirt, dust, loose gravel or debris. Remove grease or oil with a detergent and water making sure to thoroughly rinse. Broom away any standing water. Coat the entire surface using a brush or suitable spray equipment. Best results are obtained if two coats are applied with the second coat perpendicular to the first. Allow a minimum of 36 hours between coats. Foundation walls should be thoroughly broomed and rinsed with clean water, ensuring the removal of dirt, dust and loose concrete particles. Apply JETCOAT Non-Fibered Emulsion Roof and Foundation Coating using a brush or suitable spray equipment. To reinforce cracks, sandwich a layer of JETCOAT Resin Treated Multi-Purpose Reinforcing Fabric between subsequent coats. Allow a minimum of 36 hours of curing prior to backfilling. Do not apply if heavy dew or rain is imminent within 24 hours of application. Do not apply if temperatures are expected to fall below 50ºF within 24 hours of application. Extremely chalking or rust scaled surfaces will require a primer. When wet, clean tools with water. If cured use a waterless hand cleaner.

Squeegee Application

Squeegee Application

Non-fibered formulation facilitates ease of sprayability.

Item Number
Unit Size Unit Weight Pack Pack Weight
60705 4.75 gal. Pail 46 lbs.

1

46 lbs.
60701 .9 gal. Can 9 lbs.

6

55 lbs.

Tools Needed:

You May Also Need:
GlovesPush BroomSqueegeSqueege -
 

Home Owner - DIY

Agriculture


       

Home | About Us | Products | Brands | Literature | Sds & Data Sheets | Where To Buy | Contact Us

All Content Copyright © JETCOAT 2008