jetcoat jetcoat Where To Buy Contact
Home About Us Products Brands Literature Sds & Data Sheets spacer
JETCOAT...the trusted name
Jetcoat Home Page Jetcoat Home Page Jetcoat Home Page
  Go Back To Products Page  

 

 

JETCOAT 15-Year Superior White Liquid Thermoplastic Rubber Coating
The White Roof Coating That Stand Up to Ponding Water

  • Highly Elastic - Withstands Roof Contractions & Expansions
  • Superior Tensile Strength - Forms a Tough Rubber Membrane
  • Highly Reflective Finish - Lowers Energy Costs
  • Can be Applied in Cooler Temperatures - as Low as 35°F
  • Freshly Applied Coating Unaffected by rain or Dew - No Wash-Off

Sizes Available:
4.75 Gallon Pail
.9 Gallon Pail

COVERAGE:
Apply at a minimum rate of 70 square feet per gallon per coat. Two coats are recommended for optimum waterproofing properties and durability.

 


FarmPride
» sds (pdf) » Where to Buy
» Tech Data Sheet PDF Icon (pdf)  

Description
JETCOAT White Liquid Thermoplastic Rubber Coating is a white, highly elastomeric, thermoplastic rubber coating that provides a waterproof sealant over flat roofs. Coating is formulated to hold up to ponding water on flat roofs. Coating can be installed on most roofing substrates including Built-Up Roofing (BUR), Metal, Concrete, EPDM Rubber, TPO, APP, Modified Bitumen, Polyurethane Foam, PVC, Asphalt, Wood and more. Coating can be applied in cooler temperatures as low as 35°F. Coating helps extend the life of the roof and reduce building energy costs by increasing solar reflectance. Wet, freshly applied coating will not wash off even if rain occurs immediately after application.

Uses
• Built Up Roofs (BUR)
• Metal Roofs
• EPDM Rubber Roofs
• Modified Bitumen
• Polyurethane Foam
• TPO, APP, PVC
• Concrete Roofs
• And More

Application
Stir JETCOAT White Liquid Thermoplastic Rubber Coating thoroughly before and during application. DO NOT THIN. Coating can be applied by brush, roller or spray. Apply at a rate of 70 square feet per gallon per coat. Two coats are recommended for optimum performance. Allow coating to dry thoroughly between coats. Airless spray equipment shall be capable of producing 3,000 psi and 1 gallon per minute capacity. Recommended spray tip size is .025 to .035. Brush should be quality synthetic. Roller should be long nap for solvent based coatings.

Aluminum Roof

Aluminum Roof


Item Number
Unit Size Unit Weight Pack Pack Weight
66185 4.75 gal. Pail 57 lbs.

1

57 lbs.
66181 .9 gal. Can 11.5 lbs.

6

69 lbs.

Tools Needed:

You May Also Need:
HoseGloves -


 

Home Owner - DIY

Agriculture


       

Home | About Us | Products | Brands | Literature | Sds & Data Sheets | Where To Buy | Contact Us

All Content Copyright © JETCOAT 2008