jetcoat jetcoat Where To Buy Contact
Home About Us Products Brands Literature Sds & Data Sheets spacer
JETCOAT...the trusted name
Jetcoat Home Page Jetcoat Home Page Jetcoat Home Page
  Go Back To Products Page  

 

 

Farm Pride - 10-Year Premium White Elastomeric Roof Coating
Creates an Energy Saving Rubber Membrane

  • High Solids Formula for Maximum Film Build
  • Forms a Durable Rubber Membrane
  • Meets ASTM D6083
  • 100% Acrylic Elastomeric Formula
  • Superior Reflectivity
  • 10-Year Protection

Sizes Available:
4.75 Gallon Pail
.9 Gallon Pail

Coverage:
Approximately 50-75 square feet per gallon per coat. Two coats are recommended.

 


FarmPride
» sds (pdf) » Where to Buy
» Tech Data Sheet PDF Icon (pdf)  

Description
A superior product featuring unmatched adhesion, low temperature flexibility and durability. This product exceeds the stringent performance requirements of ASTM-D6083. Forms a tough, durable rubber membrane over a variety of roof surfaces. Superior reflectivity lowers interior building temperature providing energy savings up to 35%. Dries bright white..

Uses
• Metal Roofs
• Old Asphalt Coatings
• EPDM Roofs
• APP & SBS Modified Bitumen
• Mobile Homes & RV’s
• Wood
• Concrete
• Polyurethane
• Composition Build-Up
• And More

Application
• Clean Roof - Sweep off all dirt, dust, and debris. Remove rust, mildew, oil, grease, or other foreign material on the surface. Allow freshly applied asphalt roofs to cure a minimum of 4 weeks prior to applying this coating. Scrub roof with roof cleaner or bleach solution (1 part chlorine bleach and 3 parts water). Rinse thoroughly and allow to dry.

• EPDM ROOFS: When coating EPDM roofs it is extremely important to remove all dust, dirt, and embedded clay to assure proper adhesion. Thoroughly scrub roof surface with roof cleaner or bleach solution (1 part chlorine bleach and 3 parts water) and pressure wash entire roof surface. Use a wide tip on pressure washer to prevent tearing roof material. Allow surface to dry.

• Applying Roof Coating - Stir pail thoroughly. Do not dilute. For best results apply White Elastomeric Roof Coating with a soft brush, 3/4” nap paint roller, or high pressure sprayer (Tip Size: .021 to .025). For optimum performance, durability and warranty purposes, apply a second coat.

Squeegee Application

Squeegee Application

Forms a tough, durable rubber membrane over a variety of roof surfaces.

Item Number
Unit Size Unit Weight Pack Pack Weight
66485 4.75 gal. Pail 55 lbs.

1

55 lbs.
66481 .9 gal. Can 11.3 lbs.

6

69 lbs.

Tools Needed:

You May Also Need:
GlovesPush BroomSqueege White Elastomeric Roof Patch
White Resin Treated Glass Fabric


 

Home Owner - DIY

Agriculture


       

Home | About Us | Products | Brands | Literature | Sds & Data Sheets | Where To Buy | Contact Us

All Content Copyright © JETCOAT 2008