JETCOAT 2-Year Standard Driveway Sealer
Polymer Modified Asphalt Emulsion Based Sealer
- 2-Year Protection
- 2x Polymer Modification
- Fortified with Sand for Slip-Resistance
- Dries Black
Sizes Available:
4.75 Gallon pail – Coverage: 250-350 sq. ft. per pail
Description
A polymer modified asphalt emulsion based driveway sealer designed to protect asphalt pavement surfaces. Fortified with sand for slip resistance and durability.
Uses
• All types of asphalt pavements
• DO NOT USE on concrete or masonry surfaces
Application
JETCOAT Standard Driveway Sealer is packaged ready to use. Stir sealer to a uniform consistency and continue to stir throughout application. With pavement still damp, apply a uniform coat of sealer, being sure to avoid heavy or uneven application which may result in cracking or tracking. A second coat should be applied after the first coat has dried “to the touch” or within 24 hours at stated coverage rate. A rubber squeegee or brush is recommended for application. Depending on pavement porosity, coverage will vary from 250-350 sq. ft. per pail.
(For Vehicle traffic, you must allow 24 hours for product to completely cure.)
CALIFORNIA PROPOSITION 65 CHEMICAL WARNING:
This product contains chemicals known to the state of California to cause cancer.
Item Number | Unit Size | Unit Weight | Pack | Pack Weight |
---|---|---|---|---|
25715 | 4.75 gal. Pail | 55.4 lbs. | 1 | 55.4 lbs. |
Tools Needed:
Resources:
JETCOAT IS A TRUSTED NAME – YESTERDAY, TODAY AND INTO THE FUTURE.
Products
Contact
JETCOAT Inc.
PO Box 23054
472 South Brehl Ave
Columbus, OH 43223
info@jetcoatinc.com
800-394-0047