Use for Coating Entire Surface Area, Above or Below Grade
4.75 Gallon Pail
.9 Gallon Pail
Metal Roofing: 60-70 sq. ft. per gallon
Felt or Composition: 50-60 sq. ft. per gallon
Concrete or Masonry Surfaces: 25-50 sq. ft. per gallon
Strip Composition or Dried Out Roofing: 25-50 sq. ft. per gallon
Use for roofs or foundations, above or below grade.
A mixture of liquid asphalt and fibers designed to form a tough, adhesive bond with most roof surfaces. This material will seal small cracks, joints, seams and nail holes. Highly resistant to water and other types of weather damage. Dries black.
• Metal Roofs
• Built-Up Roofs
• Concrete and Wood Roofs
• Concrete Foundations
Clean surface with brush or broom, removing all loose sediment and dirt. Nail down any loose parts. Repair any leaking or weak areas with JETCOAT All Weather Roof Cement and JETCOAT Asphalt Coated Reinforcing Fabric repair material. Then coat entire surface area with JETCOAT Fibered Roof and Foundation Coating. For best results, apply a uniform coating with roofing brush when surface is dry. One coat provides year round protection. Do not apply if rain is imminent within 24 hours of application. Clean tools with mineral spirits or kerosene in a well ventilated area immediately after use.