Farm Pride – Non-Fibered Roof, Fence and Foundation Coating
Asphalt Based Sealer/Preservative
Penetrates, Preserves and Protects Roofs, Foundations, Wood Fences, Barns and most other surfaces
Use for Coating Entire Surface Area, Above or Below Grade
Brush or Spray
4.75 Gallon Pail
.9 Gallon Pail
Metal Surfaces: 90-100 sq. ft. per gallon
Concrete and Masonry Surfaces: 75-100 sq. ft. per gallon
Wood or Composition: 65-90 sq. ft. per gallon
Worn Roofing: 50-80 sq. ft. per gallon
Use for roofs or foundations, above or below grade.
This sealer/preservative is an excellent saturant for excessively dry composition roofing. It will add years of service as it rust proofs metal, preserves wood, damp proofs stone or brick and rejuvenates composition surfaces. May be used to coat concrete foundations, above and below grade. Ideal for use as a fence and barn coating.
Clean surface with brush or broom, removing all loose sediment and dirt. Nail down any loose parts. Repair any leaking or weak areas with All Weather Roof Cement and JETCOAT Asphalt Coated Reinforcing Fabric repair material. Then coat entire surface area with JETCOAT Non-Fibered Roof, Fence and Foundation Coating. Material may be brushed, rolled, or sprayed using a minimum 500 psi airless sprayer (Tip Size .021 to .025). Porous surfaces may require two applications. Do not apply on any wet surface. Do not apply if rain is imminent within 24 hours of application. Clean tools with mineral spirits or kerosene in a well ventilated area immediately after use.