Polymer Modified Asphalt Emulsion Based Driveway Resurfacer
10x Polymer Modification
Urethane Enhanced for Longest Life
Best for Heavy Traffic Areas
Ultimate Non-skid Protection
Fast & Easy to Apply
Dries to a Rich Black Finish
4.75 Gallon pail – Coverage: 250-350 sq. ft. per pail
A rubber squeegee or brush is recommended for application.
A polymer modified asphalt emulsion based driveway resurfacer designed to beautify and protect asphalt pavement surfaces. Fortified with sand for ultimate filling, non-skid protection and longest life. Made with an Advanced No-Stir Gel Formula. This driveway resurfacer is great for heavy traffic areas and dries to a rich black finish.
• All types of asphalt pavements
• DO NOT USE on concrete or masonry surfaces
JETCOAT Supreme Driveway Resurfacer is packaged ready to use. No stirring is necessary. With pavement still damp, apply a uniform coat of sealer, being sure to avoid heavy or uneven application which may result in cracking or tracking. A second coat should be applied after the first coat has dried “to the touch” or within 24 hours at stated coverage rate. A rubber squeegee or brush is recommended for application. Depending on pavement porosity, coverage will vary from 250-350 sq. ft. per pail.
(For Vehicle traffic, you must allow 24 hours for product to completely cure.)
CALIFORNIA PROPOSITION 65 CHEMICAL WARNING:
This product contains chemicals known to the state of California to cause cancer.