A Waterproof Adhesive for Use in the Application of Roll Roofing
Bonds Layers of Roll Roofing
Provides a Moisture Barrier
4.75 Gallon pail – Coverage: 250-350 sq. ft. per coat
.9 gallon Pail
50 square feet per gallon, 150-175 Linear feet per 4 inch Lap.
Intended primarily as a blind nailing cement for use with roll roofing.
A special blend of adhesive asphalts, fibers, special resins and other ingredients that assure its rapid fusion to the base surface. Intended primarily as a blind nailing cement for use with roll roofing. It creates a tight bond and prevents buckling and curling of edges. Roof adhesive is also suitable for application to older roofs to seal cracks and pinholes. Dries black.
Adhesive for Rolled Roofing
Clean surface with brush or broom, removing all loose sediment and dirt. Nail down any loose parts. Apply JETCOAT Lap Cement Roof Adhesive with a roofer’s brush or a masonry trowel in a uniform consistency. Apply a sufficient amount of adhesive to cover the entire underside of the membrane and to allow a 1/8” – 1/4” bead of adhesive to form along the lap seam when membrane is pressed into place. Broom or walk the overlying sheet firmly into the cement and smooth it out to prevent buckles or blisters. Do not apply if rain is imminent within 24 hours of application. Clean tools with mineral spirits or kerosene in a well ventilated area immediately after use.
CALIFORNIA PROPOSITION 65 CHEMICAL WARNING:
This product does not contain any California Proposition 65 Chemicals.