Coverage is dependent upon depth and width of cracks. Typically, one quart of Concrete Crack Sealant will fill approximately 20-35 feet of cracks.
Designed for filling cracks in concrete pavement surfaces.
A 100% acrylic elastomeric sealant designed for filling cracks up to 1/2” wide in concrete pavement surfaces.
Filling cracks in concrete pavement surfaces.
Clean Cracks – Remove dirt and vegetation from cracks with screwdriver, wire brush or other suitable instrument. Flush out crack with water and allow to dry.
Apply Concrete Crack Sealant – Mix contents of container by moderately shaking. Cut top of spout to desired width (smaller than width of crack). Fill cracks and smooth flush to adjoining pavement with putty knife. Allow crack sealant to dry for 24 hours. If desired, a second application may be applied. Allow Crack Sealant to cure 24 hours before resuming traffic.
CALIFORNIA PROPOSITION 65 CHEMICAL WARNING:
This product does not contain any California Proposition 65 Chemicals.